
100G QSFP28 BIDI 40km
FB-LINK's single fiber Lambda QSFP28 BiDi ER transceiver module is designed for 100 Gigabit Ethernet links over 40 kilometers of SMF, compliant with IEEE802.3cd. This module has 4x25Gbps (NRZ) electrical interface signals and 1x100Gbps (PAM4) optical interface signals. The electrical interface complies with OIF CEI-28G-VSR and QSFP28 MSA; The optical side is compliant with 100G Lambda MSA 100G-ER1.
- Product Introduction
100G QSFP28 BIDI 1304/1309nm Single 40km Optical Transceiver
FB-LINK's single fiber Lambda QSFP28 BiDi ER transceiver module is designed for 100 Gigabit Ethernet links over 40 kilometers of SMF, compliant with IEEE802.3cd. This module has 4x25Gbps (NRZ) electrical interface signals and 1x100Gbps (PAM4) optical interface signals. The electrical interface complies with OIF CEI-28G-VSR and QSFP28 MSA; The optical side is compliant with 100G Lambda MSA 100G-ER1.
● Single +3.3V power supply
● Up to 40km transmission on SMF
● Hot-pluggable QSFP28 MSA form factor
● Lane signaling rate 53.125GBd with PAM4
● Low power dissipation(Max:4.5W)
● Operating case temperature range:0 degree to 70 degree
● Compliant with IEEE 802.3bs and 100G Lambda MSA
● I2C Communication Interface
● 100GBASE-ER1-40 BIDI
● Transmission up to 40km

Electrical Characteristics (Top=0~70 degree , Vcc=3.14~3.47V)
|
|
|
|
|
|
|
|
||
|
|
||||||||
|
|
25.78 |
|
|
|||||
|
100 |
|
900 |
|
|||||
|
|
|
10 |
% |
|
||||
|
|
||||||||
|
|
25.78 |
|
|
|||||
|
100 |
|
900 |
|
|||||
|
|
|
10 |
% |
|
||||
|
Transition time, 20% to 80% |
9.5 |
|
|
|
||||
|
|
|
6.5 |
|
|||||
|
Eye width at 10-15robability |
EW15 |
0.57 |
|
|
|
|||
|
Eye height at 10-15probability |
EH15 |
228 |
|
|
|
|||
Optical Characteristics (Top=0~70 degree , Vcc=3.14~3.47V)
|
|
|
|
|
|
|
|
|||
|
|
|||||||||
|
|
53.125 |
|
|||||||
|
λ1 |
1303.54 |
1304.58 |
1305.63 |
|
|||||
|
λ2 |
1308.09 |
1309.14 |
1310.19 |
|
|||||
|
1.7 |
|
7.1 |
1 |
||||||
|
POMA1 |
4.7 |
|
7.9 |
|
|||||
|
(OMAouter) (min)for 1.4 dB Less than or equal to TDECQ Less than or equal to TDECQ (max) |
POMA2 |
3.3+TEDCQ |
|
|
|
||||
|
Closure for PAM4 (TDECQ) |
|
|
3.9 |
|
|||||
|
5 |
|
|
|
||||||
|
Side-mode suppression ratio |
30 |
|
|
|
|||||
|
|
|
–15 |
|
||||||
|
|
|
|
-26 |
2 |
|||||
|
|
|||||||||
|
|
53.125 |
|
|||||||
|
λ1 |
1308.09 |
1309.14 |
1310.19 |
|
|||||
|
λ2 |
1303.54 |
1304.58 |
1305.63 |
|
|||||
|
-2.4 |
|
|
3 |
||||||
|
-16 |
|
-3.4 |
4 |
||||||
|
For TECQ < 1.4 dB For 1.4 Less than or equal to TECQ 3.6 dB For 1.4 Less than or equal to TECOS 3.9 dB |
Psens1 |
|
|
13.8
-15.2 + TECO |
5 |
||||
|
-26 |
|
|
|
||||||
|
Los De-Assert |
|
|
-16 |
|
|||||
|
-30 |
|
|
|
||||||
1,Average launch power (min) is informative and not the principal indicator of signal strength. A transmitter with launch power below this value cannot be compliant; however, a value above this does not ensure compliance.
2,Transmitter Reflectance is defined looking into the transmitter.
3,The receiver shall be able to tolerate, without damage, continuous exposure to a modulated optical input signal having this power level on one lane.
4,Average receive power (min) is informative and not the principal indicator of signal strength. A received power below this value cannot be compliant; however, a value above this does not ensure compliance.
5,CAUI4 mode,the Pre-FEC BER level is 2E-4.
FB-LINK's single Lambda 100G QSFP28 BIDI 40km transceiver module is designed for use with 100 Gigabit Ethernet links over 40 kilometers of single-mode fiber. The module contains 1 channel of optical signaling and operates at 100Gbps data rate. This module can convert 4 channels of 25Gbps (NRZ) electrical input data into 1 channel of 100Gbps (PAM4) optical signals, and can also convert 1 channel of 100Gbps (PAM4) optical signals into 4 channels of 25Gbps (NRZ) optical signals for electrical output data. The electrical interface of the module complies with OIF CEI-28G-VSR and QSFP28 MSA.
| FBL-QSFP-100G-BX40 | FB-LINK | ||
| QSFP28 | 106.25Gbps | ||
| 1309.14nm/1304.58nm | 40km | ||
| 1.7~7.1dBm | <-13.8dBm | ||
| 15.5dBm | -3dBm | ||
| Less than or equal to 4.5W | >5.0dB |
We all know that conventional optical fiber transmission is single-fiber and unidirectional. To achieve two-way communication, two optical fibers are needed. Compared with the two, BIDI technology only requires one optical fiber, which means that the transmission capacity of the existing optical fiber is increased. doubled, thus saving fiber resources.
In addition, dual-fiber optical modules have only one wavelength, usually 850nm, 1310nm, 1550nm, etc. The single-fiber optical module has two different wavelengths. Since the wavelength used by BIDI optical modules does not produce a large dispersion penalty, there is no other difference in transmission indicators from dual-fiber bidirectional optical modules, and it has obvious advantages in cost and does not require additional maintenance and management. Therefore, the optical fiber direct connection solution is The use of single-fiber bidirectional modules is the best choice. At the optical module level, BIDI optical modules and colored optical modules can improve fiber utilization to a certain extent, and are also a good cost-saving choice for users.
The FB-LINK 100G QSFP28 BIDI LR1 single-fiber optical module is fully compatible with existing switch interfaces, and uses a simpler traditional TO air-tight packaging, which reduces the consumption of production process hours, so the manufacturing cost will be relatively reduced.
The transmitter and receiver of the 100G QSFP28 BIDI LR1 single-fiber optical module only use one optical chip each. The product design is simpler, which not only reduces device costs, but also reduces production and manufacturing costs.
100G Connectivity for Data Center and Telecom





Hot Tags: 100G QSFP28 BIDI 40km, China 100G QSFP28 BIDI 40km suppliers, manufacturers, factory
You Might Also Like









